This mechanism is designed to work with the Cenro 4151 and is made by Furniture Rehab as a replacement part. It is meant to be used in rocker recliners that use manual recline mechanism using external hand levers, such as Sir Rawlinson Motion or others...

FR Furniture Rehab 4181 Glider Recliner mechanism set is for recliners that are built with the glide motion as well as recline. This set is the left and right facing recliner mechanism scissors only all connecting tubes etc sold separately . This...

This RMT mechanism is for three position reclining and compatible with several major brands. It weighs 4.5 kg, and can work with both manual cable release, inside handle, or outside handle mechanism release. Check your mechanism's labels to see if it...

FR Furniture Rehab 4318 Recliner mechanism set is for recliners that are built with dual motion. This set is the left and right facing recliner mechanism scissors only all connecting tubes etc sold separately . Features 2-position seating of closed TV...

This is Furniture Rehab's version of a 22 inch swivel ring base. It's a standard sized 22 inch diameter ring with an attached ball bearing swivel plate. The swivel plate has the standard mounting holes roughly 8" inches apart. It's got...

Furniture Rehab Brand Be Aware of Imitators. Replacement ring base for chair 27 inch. This furniture chair repair part is a standard 27 inch ring type base. This furniture measures approx. 27 inches across. This is the perfect furniture repair part to...

Furniture Rehab standard swivel ring base is found on many different styles of chairs. This swivel chair repair part has a heavy duty full race 49 ball bearing swivel plate attached to the ring base. The swivel plate measures approximately 10.25"...

This is a swivel glider ring base for upholstered chairs. This Base Comes on a 25.5 Inch Diameter Ring Base, and comes in widths ranging from 20.5 Inches up to 24.5 Inches in total width Between the Mounting wings. This is compatible with most wood...

Rocker Recliner swivel base assembly. This unit replaces the base of a standard rocker recliner. Once installed this unit allows the rocker recliner to attach to our 22, 24 or 25.5 inch swivel ring base (not included) and will add swivel motion...

FR Brand. KD clip for recliner mechanism. This is used to attach the recliner back on to the recliner mechanism. The KD bracket measures approximately 5 inches long. The bottom of the taper sleeve has an opening of 1 3/4 inches and measures about 1 inch...

Set of 2 Lane recliner bushing grommets for drive tube. These drive tube bushing grommets will hold in place by snapping into the recliner mechanism and holding the drive tube in place. These bushings are for drive tubes used by lane, action, the...

Lane Recliner Bushing Grommets for Drive Tube set of 2. These Drive Tube Bushing Grommets Will Hold In Place By Snapping into the Recliner Mechanism and Holding the Drive Tube In Place. These Bushings are for the Large Diameter 3/4 Inch Style Drive...